Paper Industry
Steels

Hung-Shuh Cutting Rule

Hung-Shuh Creasing Rule

Hung-Shuh Label Rules

Hung-Shuh Perforating Rules
 
Hung-Shuh Cutting Rule
 
TYPE STANDARD BEVELS TIP ANGLE HARDENED EDGE OTHERS
A CB – Center Bevel

∠42, 52 NO Description
B LCB – Long Center Bevel

∠42/7, 52/7 NO Description
C CB – Center Bevel

∠30, 42, 52 YES Description
D LCB – Long Center Bevel

∠42/7, 52/7 YES Description
S SB – Side Bevel
LSB - Long Side Bevel

∠42, 52 ∠52/11 YES Description
H High Rule with Center Bevel
High Rule with Long Center Bevel

∠42, 52 ∠52/7 YES Description
Others:
  • For Type A, B, C and D, we provide both shaved and ground bevel.

  • Type A
    STANDARD BEVELS CB – Center Bevel
    THICKNESS 0.45mm /0.53mm /0.71mm /1.06mm /1.42mm
    HEIGHT 22.80mm~23.80mm
    TIP ANGLE ∠42, ∠ 52
    TIP HARDNESS No Hardened Edge
    BODY HARDNESS 0.45mm/0.53mm/0.71mm:HS48 HS52 HS55 HS60 1.06mm/1.42mm:HS48 HS52
    SPECIFICATION Suitable to cut cardboard and carton

    Type B
    STANDARD BEVELS CB – Center Bevel
    THICKNESS 0.45mm /0.53mm /0.71mm /1.06mm /1.42mm
    HEIGHT 22.80mm~23.80mm
    TIP ANGLE ∠42, ∠ 52
    TIP HARDNESS No Hardened Edge
    BODY HARDNESS 0.45mm/0.53mm/0.71mm:HS48 HS52 HS55 HS60 1.06mm/1.42mm:HS48 HS52
    SPECIFICATION Suitable to cut card, carton or thicker material.

    Type C
    STANDARD BEVELS CB – Center Bevel
    THICKNESS 0.45mm /0.53mm /0.71mm /1.06mm /1.42mm
    HEIGHT 22.80mm~23.80mm
    TIP ANGLE ∠30 , ∠42, ∠ 52
    TIP HARDNESS HV630
    BODY HARDNESS 0.45mm/0.53mm/0.71mm:HS48 HS52 HS55 HS60 1.06mm/1.42mm:HS48 HS52
    SPECIFICATION The hardened edge is suitable to cut card, business card, corrugated paper, etc.
    Small angle incision provides better cutting effects and cutting face
    Special 0.45 and 0.53 mm thin blade models are available for sticker, PCB, or other complex templates

    Type D
    STANDARD BEVELS LCB – Long Center Bevel
    THICKNESS 0.53mm /0.71mm /1.06mm /1.42mm
    HEIGHT 22.80mm~23.80mm
    TIP ANGLE ∠42/7, ∠ 52/7
    TIP HARDNESS HV630
    BODY HARDNESS 0.53mm/0.71mm:HS48 HS52 HS55 HS60 1.06mm/1.42mm:HS48 HS52
    SPECIFICATION Dual stage tool tip provides better cutting performance as its tip angle changed when cutting downwards. It is suitable for cutting thicker material like thick cardboards, plywoods, plastics and so on. Special 0.53 mm thin blade models are available for sticker, PCB, or other complex templates

    Type S
    STANDARD BEVELS SB – Side Bevel
    LSB - Long Side Bevel
    THICKNESS 0.71mm/ 1.06mm
    HEIGHT 23.8, 30, 32, 40, 50mm
    TIP ANGLE ∠42, ∠ 52 ∠42/11, ∠ 52/11
    TIP HARDNESS HV630
    BODY HARDNESS HS52, HS55
    SPECIFICATION Side bevel rule can decrease impact on material which is suitable to cut rubber, padding and paper with metal on it.

    Type H
    STANDARD BEVELS High Rule with Center Bevel High Rule with Long Center Bevel
    THICKNESS 0.71mm/ 1.06mm
    HEIGHT 30, 32, 40, 50mm
    TIP ANGLE ∠42, ∠ 52 ∠42/7, ∠ 52/7
    TIP HARDNESS HV630
    BODY HARDNESS HS52, HS55
    SPECIFICATION The tip made by grinding which is sharp. It is extra hard to harden by high frequency, which is suitable to cut thicker copper paper, foam sheet, and leather plastic
     
     
    Owing to its long-time sectoral background and experience, KUESTA undertakes imports and exporting of the mould knives and every sort of products used in their manufacturing. With its worldwide imports network and high-quality...
    Owing to its long-time sectoral background and experience, KUESTA undertakes imports and exporting of the mould knives and every sort of products used in their manufacturing. With its worldwide imports network and high-quality...
     
    Address: Ziya Gokalp Mh. Metal Is Sanayi Sit.4. Blok No:20-22 34306 Ikitelli – Istanbul - TURKIYE
    Phone: +90 212 553 53 13 (Pbx)
    Fax: +90 212 549 91 95
    E-mail: kuesta@kuesta.com

     
         
      Copyright © 2011 - KUESTA Foreign Trade - www.kuesta.com
    kuesta@kuesta.com
     
      Web design: Özcan Şahintürk